We Identify the Faucet Type First
Compression, cartridge, ball, and ceramic disc faucets each fail differently. We confirm which one you have before ordering parts or starting the repair.
Licensed & Insured • Upfront Pricing • Fast Response
Faucet Repair in El Paso, TX
A dripping faucet almost always comes down to one worn part, but which part depends on what kind of faucet you have. A double-handle faucet that needs several turns to shut off is usually a compression faucet with a worn washer. A single-handle faucet is more likely cartridge, ball, or ceramic disc. El Paso Plumbing identifies the faucet type first, then replaces the exact part causing the leak, or the fixture itself if it's past repair. Call to schedule service or request an inspection online.
Same-Day Plumbing Service
Workmanship Guaranteed
Trusted Local Plumbers
Faucet Repair Near Me
Why Faucet Type Matters More Than the Symptom
Two faucets that both drip can need completely different repairs. A compression faucet drips because its rubber washer wore out. A cartridge faucet drips because the cartridge or its O-rings failed. A ball faucet leaks when the internal springs and seats wear down. Fixing the wrong part means the drip comes right back.
El Paso Plumbing repairs kitchen faucets, bathroom faucets, tub and shower faucets, utility sink faucets, and outdoor hose bibs across East El Paso, West El Paso, Northeast El Paso, Mission Valley, Downtown, Horizon City, Socorro, Fort Bliss, Canutillo, Anthony, and Sunland Park.
Call to schedule faucet repair, or request service online for a drip, a leak under the sink, low pressure, or a faucet that’s ready for replacement.
Why Choose Us
Why El Paso Homeowners Call Us for Faucet Repair
Here’s what our approach means when a faucet drips, leaks, or loses pressure.
Repair or Replace, Explained Clearly
Most drips are a single worn part. But if the faucet body itself is corroded or cracked, we tell you honestly rather than patching something that won’t hold.
Hard Water Buildup Addressed
Mineral deposits speed up wear on cartridges, aerators, and seals. We check for buildup as part of every repair, not just the obvious symptom.
Clear Pricing Before Work Begins
You’ll hear what part failed and what the repair or replacement costs before we start.
Tested Before We Leave
We run the faucet through hot and cold, check the base and supply connections for leaks, and confirm smooth handle operation before considering the job done.
Our Process
How Faucet Repair Works in El Paso
We keep the process clear, from your first call through the final leak check.
Schedule Your Repair
Call or request service online. Let us know where the faucet is leaking from, whether it’s dripping, low pressure, or won’t shut off fully.
Inspect the Faucet
A plumber identifies the faucet type, checks the handle, cartridge or washer, base, aerator, and supply line connections to find the actual source.
Explain the Findings
We tell you which part failed and whether repair or replacement makes more sense, along with the cost, before doing any work.
Complete the Repair and Test It
We replace the worn part or install a new faucet, then test water flow, temperature control, and check every connection for leaks.
Compression Faucets: Two Handles and a Worn Washer
If your faucet has separate hot and cold handles that need several full turns to shut off, it’s a compression faucet, the oldest and simplest style, common in homes built before the 1990s. These faucets stop water by pressing a rubber washer against a metal seat, and that washer is exactly what wears out over time and causes the classic slow drip.
We replace the washer, stem, and O-rings as needed, and check the seat itself for pitting that a new washer alone won’t fix.
Signs You Have a Compression Faucet
Two separate handles, each requiring multiple turns to fully open or close, is the clearest sign. If the handle feels like it’s tightening down rather than simply turning, that confirms it.
Washer and Seat Replacement
A fresh washer is a quick fix if the seat underneath is still smooth. A pitted or corroded seat needs replacing too, or the new washer will wear out just as fast.
Cartridge, Ball, and Ceramic Disc Faucets: One Handle, Different Parts
Single-handle faucets are usually cartridge, ball, or ceramic disc types, and each one fails at a different internal part. A cartridge faucet moves smoothly and drips when the cartridge or its O-rings wear out. A ball faucet feels slightly stiffer to operate and leaks when internal springs and rubber seats degrade. A ceramic disc faucet has a noticeably wide base and leaks less often, but when it does, it’s usually the disc seals.
We open the faucet to confirm exactly which type it is, since the outside can look similar across all three, and repair the specific part that’s actually failing.
Cartridge Faucet Drips and Low Pressure
A worn cartridge often causes both a drip at the spout and reduced water pressure, since mineral buildup and worn seals affect flow the same way they affect sealing.
Ball Faucet Leaks at the Base or Spout
Ball faucets have more moving parts than a cartridge, so a full rebuild kit with new springs, seats, and O-rings is usually the right fix rather than replacing one piece alone.
Low Water Pressure at the Faucet
Weak flow at a single faucet is often simpler than it seems. A clogged aerator collecting mineral deposits is one of the most common causes, and cleaning or replacing it can restore pressure in minutes. When pressure stays low after that, a worn cartridge, a partly closed shut-off valve, or a restricted supply line is usually behind it.
El Paso’s hard water accelerates mineral buildup inside aerators and cartridges, so faucets here often need this checked sooner than in areas with softer water.
Clogged Aerator Cleaning
Unscrewing and cleaning the aerator, or replacing it if it’s heavily scaled, is often enough to bring pressure back to normal.
Shut-Off Valve and Supply Line Checks
A valve that isn’t fully open or a kinked supply line can also cause weak flow. We check both before assuming the problem is inside the faucet itself.
When Faucet Replacement Makes More Sense Than Repair
A single worn part is usually an easy fix, but a faucet body with corrosion, cracks, or a stripped mounting connection isn’t worth repairing repeatedly. Replacement is also worth considering if a faucet is outdated, hard to operate, or you’d rather upgrade to a water-efficient model while the plumber is already there.
We install kitchen faucets, bathroom faucets, tub and shower faucets, and outdoor hose bibs with secure supply connections and a full leak test.
Signs a Faucet Is Past Repair
Visible corrosion on the faucet body, a base that leaks no matter what part is replaced, or a mounting nut that won’t hold are signs it’s time to replace rather than repair again.
New Faucet Installation
We connect the new faucet’s water lines, seal the base, and test hot and cold flow and handle operation before finishing.
Schedule Faucet Repair in El Paso, TX
Whether your faucet is dripping, leaking under the sink, running low on pressure, or ready for an upgrade, El Paso Plumbing identifies the exact cause before recommending a fix. Call to schedule service or request an inspection online.
Faucet Repair FAQ
Quick answers to common questions. If you need help now, call 915-285-0087.
What causes a faucet to drip?
It depends on the faucet type. Compression faucets drip from a worn washer, cartridge faucets from a failed cartridge or O-rings, and ball faucets from worn internal springs and seats.
How do I know what type of faucet I have?
A double-handle faucet that needs several turns to shut off is a compression faucet. A single-handle faucet is usually cartridge, ball, or ceramic disc, and the exact type is confirmed once the faucet is opened up.
Why is my faucet pressure low?
A clogged aerator is the most common cause and often the easiest fix. If cleaning it doesn’t help, a worn cartridge, a partly closed shut-off valve, or a restricted supply line may be behind it.
Should I repair or replace my faucet?
A single worn part is usually worth repairing. Replacement makes more sense if the faucet body is corroded, cracked, or keeps leaking after repairs, or if you want to upgrade the fixture.
Do you replace faucet cartridges?
Yes. We replace cartridges, washers, stems, O-rings, ball assemblies, handles, and supply lines depending on your faucet type.
When should I call for faucet repair?
Call when a faucet drips, leaks at the base or under the sink, has noticeably low pressure, or won’t shut off fully.
Customer Reviews
What Our Clients Are Saying
Real feedback from customers who trust our team.
★★★★★
I contacted El Paso Plumbing after discovering a leak under my kitchen sink. A technician arrived the same afternoon, explained the problem clearly, and replaced the damaged pipe section. The repair was completed quickly and the area was cleaned before they left.
James R. • El Paso, TX
★★★★★
Our office building in Canutillo had a sewer line blockage affecting multiple restrooms. El Paso Plumbing used a camera inspection to locate the problem and cleared the line the same day, then recommended preventative maintenance.
Maria G. • Canutillo, TX
★★★★★
We have used El Paso Plumbing several times for different repairs including faucet replacement and water heater maintenance. The plumbers always arrive on time, complete the work carefully, and explain what was repaired.
Marie S. • Horizon City, TX
Schedule Faucet Repair in El Paso, TX
Fast response • Upfront options • Professional workmanship